GoDaddy Help

Safety & Regulatory Info: GoDaddy Poynt Smart Terminal V2.0

Read this guide for important safety and health information for your GoDaddy Poynt Smart Terminal V2.0.

Note: You can find the version number on the sticker on the back of your device. Have a different version? Review the Quick Start Guides and Safety Info for all GoDaddy Payments devices.
Package contents
  • Device X 1
  • Docking Station X1
  • Universal Power Adapter X 1
  • Receipt Roll X 3

We recommend reviewing our Quick Start Guide before you begin using the GoDaddy Poynt Smart Terminal.


MediaTek MT8163V/B

Poynt OS

7" LCD
800x1280; MIPI

7" Touch Panel
Multi-point, projected capacitive type, GG, Air bond

480x800 pixels; RGB

4.3" Touch Panel
Multi-point, projected capacitive type, GG, Air bond

System Memory (RAM)

Storage (Flash Memory)
8GB eMMC; MLC type


802.11 a/b/g/n, SISO

2G I 3G (Model: P3303-A, P3303-B)
2G I 3G I LTE SIP (Model: P3303-C, P3303-D)

BT 4.2+HS compliant/Dual Role

Supports major NFC/contactless schemes, ISO14443 A&B, MiFare capable, ISO 18092 capable

Mono with chambers, optimized for voice

4.8KHz, 80dB @10cm

G-sensor. M-sensor. Light sensor. Gyroscope.

Seiko thermal printer module


Merchant-Facing Camera
2M, fixed focus.

Barcode Scan Camera
5Mp, 7cm - infinity AF

Payment Module - SoC
Maxim 32550


Battery Pack
2S1 P; 2000mAh*2, 14.8Wh

Power Adapter
AC-DC, 12VDC, 3.33A Output, 100-240VAC Input

IO Port

Memory Card
Micro SD

Nano-SIM, tray type

Micro-B USB 2.0, dual role

Power Jack
DC-in Jack

Card reader
Magnetic Strip + Chip Hybrid. EMV first

Power/Sleep button
Fast boot menu (pin-hole)

LED Indicator
System status - RGB LED, Merchant facing
Payment status - RGB LED, Customer facing


Terminal : X -120.7mm Y -250.5mm Z -91.4mm

Terminal: -6709
Dock: -75g

USB2.0 x 2, RJ45 x 1, DC Jack x 1

Regulatory Information

Operating Environment
Voltage: AC input 100-240 VAC, 50/60 Hz;
DC output 12VDC, 3.33A
Temperature: 0° to 35°C

Long Term Storage Environment
Temperature: 5° to 30°C, relative humidity 20% to 75%

Warning icon

Warning: Read this guide for important safety and health information that applies to the Poynt device that you have purchased.

Temperature warning icon

Caution: The Poynt Smart Terminal has a built-in thermal printer that will generate heat during operation. The hot surface label is located inside the printer door. Refrain from touching this area and the surrounding area until area has cooled.

Failure to follow instructions and properly set up, use and care for this product can increase the risk of serious injury or death, or damage to the device or devices.

This device contains a built-in lithium-ion battery, improper use of which may result in overheating, fire and injury. The battery in this device is not user replaceable and should only be replaced by an authorized service provider.

For optimal lithium-ion battery performance, follow advised guidelines:

  • Operating Environment Temperature
  • Storage Environment Temperature
  • Charge Poynt Smart Terminal with approved Docking Station or approved Power Adapter set to 100% full charge at least every 12 months.

Please Note:

  • Not following the above guidelines may result in the battery capacity draining quicker, increase duration to achieve full charge, impede ability to achieve full charge and deplete battery to zero capacity.
  • Not following the above guidelines may result in the product not functioning, rendering it unusable or unrecoverable.

Disposal Information
Recycle and dispose of in accordance with local, state and federal regulations. This device must be recycled or disposed of separately from household waste or recycling.

Regulatory Information
Regulatory information, certification and compliance information can be found at

FCC and IC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution

  • Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
  • This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device meets the government's requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. government.

Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. The SAR limit is 1.6 watts per kilogram in countries that set the limit averaged over 1 gram of tissue and 2.0 watts per kilogram in countries that set the limit averaged over 10 grams of tissue. During testing, radios are set to their highest transmission levels and placed in positions that simulate uses when worn or carried against the torso of the body, with 5mm separation.

Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified.

Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider's wireless and roaming networks.

California Proposition 65 Warning:
Warning icon
WARNING: This product can expose you to chemicals including nickel oxide, which are known to the State of California to cause cancer. For more information go to

Industry Canada ICES-003 Compliance Label
CAN ICES-3 (B)/NMB-3(8)

This device complies with Industry Canada license-exempt RSS standard(s). This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

EU Compliance Statement
This product complies with the RED Directive 2014/53/EU, & RoHS 2011/65/EU. Point of contact: Poynt, LLC, Attn: Compliance, 2155 E GoDaddy Way, Tempe, AZ, 85284 USA

Use Restriction: This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range.

European Union: Disposal Information
Warning icon
This symbol on the product or its batteries or its packaging means that this product and any batteries it contains must not be disposed of with your household waste. Instead, it is your responsibility to hand this over to an applicable collection point for the recycling of batteries and electrical and electronic equipment.

Europe (CE declaration of conformity)
A copy of the EU Declaration of Conformity is available at

More info

Share this article